✔Breakthrough design, there are new breakthroughs, based on ESP-12E.
✔The new four-layer board design, the new revision antenna RF performance optimization, communication distance is increased by 30% -50% compared to ESP-12E!
✔Semi-hole chip technology, the whole IO leads, with metal shielding shell.
✔Built-board PCB antenna
✔4M bytes Flash.
✔Pins and footprint are fully Compatible with ESP-12E and our relevant breakout board.
✔Most of the documentation can refer to ESP8266 page.
Standards Certification: FCC / CE / TELEC
Wireless standards: 802.11 b / g / n
Frequency range: 2.4GHz-2.5GHz (2400M-2483.5M)
Data interface: UART / HSPI / I2C / I2S / IR Remote Control GPIO / PWM
Operating voltage: 3.0 ~ 3.6V (recommendation 3.3V)
Working Current: Average: 80mA
Operating temperature: -40 ° C~ 125° C
5 X ESP-12F
Make sure this fits by entering your model number.
The ESP-12F module combines the ESP8266 microcontroller with 4MB of flash and a PCB antenna.
The default firmware can add WIFI capability to another microcontroller, but it really shines when loaded with MicroPython, or NodeMCU.
Not recommended for users who are new to the ESP8266. New users should instead look at development boards with integrated USB.
The ESP-12F is an improved version of the 12E, improve the peripheral circuit, the four laminates plate process, enhanced impedance matching, signal output is better.
It is pin compatible with enhanced stability and a better antenna.