AuviPal Gigabit PoE Splitter is used for separating PoE signal into Ethernet data (1000Mbps max) and USB-C power (DC 5V/4A max), ideal for providing faster & stable wired Ethernet and DC 5V Power for Raspberry Pi 4 simultaneously, Eliminate the need for a nearby AC outlet. What’s more, It also can be used for providing constantly DC 5V power for any other USB Type-C devices, such as phone, tablet, camera etc which is placed far alway from AC outlet.
1. It does not support QC or PD fast charging protocols.
2. We must use 802.3at compliant PoE switch or injector for Raspberry Pi 4.
3. Output 20W max (5V/4A) at 802.3at PoE switch or Injector.
4. Output 12.5W max (5V/2.5A) at 802.3af PoE switch or Injector.
Eliminate the need for a nearby AC outlet.
Lightning-fast Ethernet and Stable DC 5V/4A max power.
IEEE 802.3af/at compliant PoE switch or injector is required (Not included).
Utilize the optimized chip solution with the Isolation transformer and Standard PD chip.
Increased mobility for end devices, added safety (no AC power involved) and reliability.
Easy install, set it up in seconds, just plug and play.
Data: 10/100/1000 Mbps, RJ45 Port.
Power: DC 5V/4A max at 802.3at, DC 5V/2.5A max at 802.3af through USB-C connector.
Isolation transformer + Standard PD (Powered Devices) chip.
1 x Gigabit PoE Splitter
1 x Ethernet Cable 9.5 inch
1 x 5.5*2.1mm Barrel Male to USB-C Male Adapter
Useful Tips: We can buy extra USB adapter such as “USB-C female to Micro USB male adapter” or “USB-C female to Lightning male adapter” to make AuviPal PoE Splitter work with our Micro USB or Lightning devices!
Make sure this fits by entering your model number.
👍 Split POE siganl into Ethernet date (1000Mbps max) and USB-C or 5.5×2.1mm barrel port DC power (5V/4A max), Fully complies with IEEE 802.3af/at POE Switch or Injector (Required but not included), Output 20W max (5V/4A) at 802.3at and 12.5W max (5V/2.5A) at 802.3af.
👍 PoE HAT Alternative – Alternative way to achieve POE function for Raspberry Pi 4 and NVIDIA Jetson Nano, No need to dismount raspberry pi case or add-on screen anymore by using AuviPal POE Splitter.
👍 It utilizes the optimal PoE module solution with isolation transformer + Standard PD (Powered Devices) chip. Run your Raspberry Pi and NVIDIA Jetson Nano more stable and safer.
👍 Plug and play – Simply connect the ethernet and power cables, then you are ready to go. Set it up in seconds without any extra effort or configuration.
👍 Suitable for NVIDIA Jetson Nano and any USB-C Devices (Raspberry Pi 4, Camera, Phone, Tablet and more).