BFab Raspberry Pi Pico with Pre-Soldered Header Microcontroller Board, RP2040 Chip,Dual-Core ARM Cortex M0+ Processor, Flexible Clock Running up to 133 MHz Support C/C++,MicroPython

Description

Overview Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces. It incorporates Raspberry Pi’s own RP2040 microcontroller chip, with dual-core Arm Cortex M0+ processor running up to 133 MHz, embedded 264KB of SRAM and 2MB of on-board Flash memory, as well as 26x multi-function GPIO pins. For software development, either Raspberry Pi’s C/C++ SDK, or the MicroPython is available. There’re also complete development resources and tutorials to help you get started easily, and integrate it into end products quickly. Features Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz 264KB of SRAM, and 2MB of on-board Flash memory Castellated module allows soldering direct to carrier boards USB 1.1 Host and Device support Low-power sleep and dormant modes Comprehensive C/C++/Micropython SDK, software examples, and documentation Drag & drop programming using mass storage over USB 26 × multi-function GPIO pins 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels Accurate clock and timer on-chip Temperature sensor Accelerated floating-point libraries on-chip 8 × Programmable I/O (PIO) state machines for custom peripheral support PACKAGE CONTENT Raspberry Pi Pico with pre-soldered header x1 1*3PIN yellow pin header x1 USB-A to micro-B cable x1

Make sure this fits by entering your model number.
Original Raspberry Pi Pico with Pre-Soldered Header. Based on RP2040 microcontroller chip, designed by Raspberry Pi in the United Kingdom.Dual-Core ARM Cortex M0+ Processor.
Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz. 264KB of SRAM, and 2MB of on-board Flash memory. Accelerated floating-point libraries on-chip. 8 × Programmable I/O (PIO) state machines for custom peripheral support.
Castellated module allows soldering direct to carrier boards. USB 1.1 with device and host support. Low-power sleep and dormant modes. Drag-and-drop programming using mass storage over USB. 26 × multi-function GPIO pins.
2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels.Accurate clock and timer on-chip.Temperature sensor.
For software development, either Raspberry Pi’s C/C++ SDK, or the MicroPython is available. There’re also complete development resources and tutorials to help you get started easily, and integrate it into end products quickly.