JESSINIE ESP32-CAM Camera Development Board ESP32 WiFi Bluetooth Module 2MP OV2640 Camera Dual-core 32-bit CPU Built-in Flash Cam Module for Arduino Raspberry Pi

Description

Module model: ESP32-CAM
Package: DIP-16
Size: 27*40.5*4.5 (0.2)mm
SPI Flash: default 32Mbit
RAM: internal 520KB + external 8MB
Bluetooth: Bluetooth 4.2 BR/EDR and BLE standards
Wi-Fi :802.11 B /g/n/e/ I
Support interfaces: UART, SPI, I2C, PWM
Support TF card: maximum support 4G
IO ports: 9
Serial port rate: default 115200 bps
Image output format: JPEG (only supported by OV2640),BMP,GRAYSCALE
Spectrum range: 2400~2483.5MHz
Antenna form: onboard PCB antenna, gain 2dBi
Transmit power:
802.11b: 17±2 dBm (@11Mbps)
802.11g: 14±2 dBm (@54Mbps)
802.11n: 13±2 dBm (@MCS7)
Receiving sensitivity:
CCK, 1 Mbps : -90dBm
CCK, 11 Mbps: -85dBm
6 Mbps (1/2 BPSK): -88dBm
54 Mbps (3/4 64-QAM): -70dBm
MCS7 (65 Mbps, 72.2 Mbps): -67dBm
Power consumption:
Turn off flash: 180mA @ 5V
Turn on the flash and adjust the brightness to the maximum: 310mA @ 5V
Deep-sleep: The lowest power consumption can reach 6mA @ 5V
Moderm-sleep: minimum 20mA @ 5V
Light-sleep: minimum 6.7mA @ 5V
Security: WPA/WPA2/WPA2-Enterprise/WPS
Power supply range: 4.75-5.25V
Operating temperature: -20 ℃ ~ 70 ℃
Storage environment:-40 ℃ ~ 125 ℃ , <90% RH

802.11b/g/n Wi-Fi BT/BLE SoC module with ultra-small volume
Using low-power dual-core 32-bit CPU, it can be used as an application processor.
The main frequency is up to 240MHz and the computing power is up to 600 DMIPS.
Internal 520KB SRAM, external 8MB
Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
Support OV2640 and OV7670 cameras with built-in flash
Support picture WiFI upload
Support TF card-supports multiple sleep modes.
Embedded Lwip and FreeRTOS
Support STA/AP/STA AP working mode
Support Smart Config/AirKiss one-click network distribution
Support serial port local upgrade and remote firmware upgrade (FOTA)

Make sure this fits by entering your model number.
ESP32-CAM has a very competitive small-size camera module in the industry. This module can work independently as the smallest system, with a size of only 27*40.5*4.5mm. It is encapsulated in dip and can be used directly by inserting it into the base plate, so as to realize the rapid production of products
ESP32-CAM can be used as a separate system to run applications or slave devices of host MCU, providing Wi-Fi and Bluetooth functions through SPI/SDIO or I2C/UART interface.
Built-in 520KB SRAM, external 8MB, support for OV2640 and OV7670 cameras, built-in flash, support for STA/AP/STA AP working mode, support for Smart Config/AirKiss one-key network distribution, support for TF card
The ESP32-CAM module uses 2.4 GHz Wi-Fi plus Bluetooth dual-mode chip and TSMC low power consumption 40nm technology. The power consumption performance and radio frequency performance are the best, safe and reliable, and easy to expand to various Internet of Things applications.
The ESP-32CAM can be widely used in various Internet of Things occasions, suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other Internet of Things applications. It is an ideal solution for Internet of Things applications