Material:Stainless Steel + ABS
Working Temperature:It can reach at about 200°C / 390°F within a few seconds
Power Type:AC power supply
Plug Type:US plug
Power Cable Length:98cm/38 inch
1 * Hot Air Gun
1 * User Manual
1. This kind of gun can not adjust the temperature but it heats up quickly at about 200°C theoretically.
2. Therefore do not blow your Polymer Clay Works at one position for a long time to prevent distortion.
3. Keeping 5-6cm distance from work and about a 45 degree angle to heat until it is completed.
4. This heat gun is not a High Power one due to its 300W low power. But it is great for heating shrinkable film, embossed powder, rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun.
5. Caution with child ! ! ! Please minor children in the safe use of hot air gun under the guidance of an adult to accompany!
6. Do not use it continuously for more than 10 minutes to avoid overheating the machine!
7. Do not touch the hot nozzle when using or just after use.
Make sure this fits by entering your model number.
★ Material ★: Hot air shrink gun was made of high-quality stainless steel and ABS plastic, Dimensions 225*45mm / 8.86*1.77in
★ Voltage&Cooling Holes ★: Voltage 110V, the temp of the nozzle could reach 200° in seconds. The heat vents of the heat gun tail can decrease the internal high temp and extend the life!
★ Suitable for ★: heating shrinkable film, embossed powder, rubber stamp. Built-in stand for self-support and tabletop use!
★ Handing part ★: adopts salient point nonskid designs that cause safe handholding with small energizing!
★ Warm Tips ★: The temp of the nozzle could reach 200° in seconds, please don’t use it for more than 10 minutes at one time. 12-month Warranty, [100% Money Back Guarantee] If you’re not happy for any reason, simply contact us and we’ll give you a full refund and no need to return the product!